Rack pinion industrial lift SC40 Relilable Quality

What is Rack pinion industrial lift

Rack pinion industrial lift is a small rack and pinion structure lift. It has an automatic docking function like an indoor elevator. It can be used in port, chimney, bridge, tower crane, shaft and other working environments. The product has stable performance and strong applicability. This industrial lift can be installed and applied in different environments. It is specially equipped with an escape descent device. When the elevator is unable to run due to power failure or other reasons. The escape handle can be pulled to make the elevator slowly and uniformly car to the nearest landing level.

Technical data

CAPACITY
Payload capacity	400 kg
Passengers	3
Erection load	200 kg
Speed	0 ~ 33 m/min
Rated lifting height	150 m
Maximum tie spacing	1.5 ~ 10.5 m

DIMENSIONS
Internal width x length	1.0 x 1.0 m
Internal minimum height	2.2 m
Door opening (W x H)	0.6 x 2.0 m
Mast section (W x H)	650 x 1,508 mm

ELECTRICAL DATA
Power supply	380V 3Ph 50 Hz
Power supply fuses	32 A
Rated power	11 kW
Inverter power	15 kW
Starting current	26 A
Running current	20 A
Power consumption	13 kVA

WEIGHTS
Base unit and enclosure	3500 kg
Cage weight	1000 kg
Mini mast with 1 rack	67 kg

FEATURES & ACCESSORIES
Wall profile (offshore)	Stainless Steel
Cage frame treatment	Galvanized
Emergency lowering device	Equipped
with centrifugal brake	Equipped
Overload sensing device	Equipped
Ventilation fan & light	Equipped

General: All lifts equipped with frequency controlled drives Different masts and tie- systems to meet all kind of application demands Cage and landing doors either manual or automatic Doors installations in different positions and combinations Variety of opional equipment