Output Shaft of Reducer Gear Box For Passenger Hoist

1. Introduction

The output shaft of the reducer gear box is the shaft connected to the drive wheels and it turns at a speed determined by the gear you have selected. In the lower gears this speed will be lower than the input shaft’s speed to allow the engine to be running at an efficient speed while the driven wheels are turning at a manageable speed. In top gear however, the output shaft will be turning at close to the input shaft’s speed.

We supply different specification output shaft for different reducer of construction hoist parts output shaft, it will match with the worm gear and worm work smoothly and safely.

2. Technical Parameters

Model	Tian ming shaft	Jing gang shaft	Jiang lu shaft	Bao da shaft	Ao ya shaft	Xiang he shaft
Art. No.	11960005	11960002	11960001	11960003	1120000103	11960006
Weight	7.0	7.0	6.8	7.0	7.0	7.0
Length	309	298	294	298	312.5	292
Length of thread steps	19	18			16
Length of Spline steps	41	40	53.5	41	41	54.5
Length of Large bearing steps	30	34	33	30	34	34
Length of Large diameter steps	60	55	44	60	58.8	45
Length of Worm gear steps	79	79	79	79	78	78
Length of small bearing steps	36	36	37	36	41	34
Oil seal step diameter	Φ60	Φ60	Φ60	Φ60	Φ60	Φ60
Large bearing steps diameter	Φ65	Φ65	Φ65	Φ65	Φ65	Φ65
Worm wheel step diameter	Φ65	Φ65	Φ65	Φ65	Φ65	Φ65
Small bearing steps diameter	Φ50	Φ50	Φ50	Φ50	Φ50	Φ50
Thread	M42×1.5	M42×1.5			M42×1.5
Spline NdD*B	6×49.5×55×14	6×49.5×55×14	6×49.5×55×14	6×49.5×55×14	6×49.5×55×14	6×49.5×55×14
Keyway	20	18	18	18	18	18