The CLSJ guide roller eccentric wheel for construction hoist 450mm master section
The guide eccentric roller for 450mm, which uses for 650mm master section, is divided into pressure wheel and a guide wheel, both of which are eccentric wheels, after the roller is adjusted, and all the eccentric sleeves should be towards to the same direction, then the construction hoist can move up and down smoothly.
Main use in CLSJ construction hoist for the 650mm mast section
|Using a dust cap on the grease nipple
Overall dimension (mm)
|Large diameter D
|Small diameter d
|Step outer diameter ø
|Step height h
|Assembly height L (Move)
|Center hole A
This type of spare parts have high requirements and operating conditions in material selection and processing technology, in the surface treatment, it is the galvanizing, which can greatly increase the service life, different materials will also have an impact on the service quality and service life.
The indenter is also used together with the roller. The purpose of the indenter is to press the cover to the tank mouth first, and then the roller is used to complete the sealing task.
1. Hotlines for 24-hour Pr-sales Service.
2. We can offer customers free catalogs of our products and other relevant files.
3. Free to pick up customer’s visits from the airport to our factory.
4. Best solutions from our professional engineers.
1. Hotlines for 24-hour after-sales services.
2. Online after-sales service is available as well.
3. The technical documents will be attached to the equipment while leaving the factory.
4. Engineer available to service when the construction hoist is overseas.